Face shape calculator: no photo needed

Measure four straight lines, choose your jaw and chin outlines, then compare two shape matches. Everything happens in this tab.

Free · no account or photo needed

Four straight measurement lines: face length, cheekbone, forehead and jaw widths1234

Measure straight lines, not around your face

Use the numbered diagram and the same unit for all four values. Keep your expression relaxed. Read the guide below before measuring.

Face length: 12–30 cm (4.72–11.81 in). Widths: 8–22 cm (3.15–8.66 in).

Calculated in this tab. Your inputs are not sent or saved. No photo or account needed.

Use the face shape calculator with a clear measuring plan

A face shape calculator is useful when you want a starting label without taking or uploading a photograph. The important part happens before you press the button: decide exactly where each measurement begins and ends, and keep the method consistent across all four numbers.

This tool asks for face length, cheekbone width, forehead width and jaw width. It also asks how your jaw turns toward the chin and whether the chin looks pointed, rounded or square. Those choices give the rules information that four distances alone cannot provide. They are your observations, not measurements inferred from a camera.

If you would rather use a photograph, the face shape detector measures landmarks in your browser. The manual route is a separate way to make the comparison. You do not need an account, a camera or a saved image to use it.

Take four face shape measurements

Keep your head upright and your expression relaxed. Use a ruler or another way to read the straight distance between endpoints. A flexible tape must be held across the space rather than wrapped over the surface of your face. Curved surface distances are a different measurement and will change the width ratios.

1. Face length runs from the central hairline to the bottom of the chin. Use the same hairline point if you repeat the measurement. A fringe, a widow's peak or a changing hairline can make that point harder to choose; record a consistent approximation rather than moving it until you get a preferred result.

2. Cheekbone width runs across the widest cheekbone area from one side to the other. Keep the ruler level. Do not include the ears or follow the tape over the nose. If it is difficult to read both ends yourself, ask someone to help keep the measurement straight.

3. Forehead width runs between the sides of the forehead at brow-arch height. This is a horizontal width, not the length of the hairline around the head. Hair can hide the sides, so move it aside long enough to find the same endpoints on both attempts.

4. Jaw width runs straight between the two jaw corners. Do not measure from an ear to the chin and double that distance: that describes a different path. A beard may obscure the corners, and pressing it flat does not necessarily reveal the underlying outline.

Take the set twice and compare the readings before entering them. If a width changes noticeably, recheck the endpoints and the angle of the ruler. Consistency is more useful here than writing extra decimal places.

Enter your measurements in the face shape calculator

Choose centimetres or inches first. All four numbers must use the same unit. If you switch units after entering values, the tool converts them and clears the old result so you can calculate again. The conversion does not add precision to the original measurement.

The accepted face length is 12–30 cm and each width is 8–22 cm. The equivalent inch ranges are shown beside the form. These are input limits intended to catch missing values, mixed units and measurement mistakes. They are not a statement about which faces are normal. If your carefully checked measurements fall outside them, this tool cannot give you a result from that set.

Select the jaw contour you can actually see. Rounded means the turn into the lower face looks gradual; angular means there is a more distinct corner. Choose the chin outline separately. A visible jaw corner and a pointed chin are different features, so one answer should not automatically determine the other.

Understand the two shape matches

The face shape calculator compares the relationships between your measurements rather than choosing the largest absolute number. Face length is compared with cheekbone width; forehead and jaw widths are compared with that same cheek width. This keeps the comparison independent of whether you entered inches or centimetres.

The result shows a first and second match from the seven face shapes. When the draft rules produce close matches, the heading reads “Between” the two labels. You can still open both shape guides and compare the outlines instead of treating the second match as a mistake.

Jaw and chin selections are a simplification. The rounded or angular jaw choice stands in for an angle measurement, and the pointed chin choice stands in for a chin-width relationship that the form does not measure. Rounded and square chin choices are both treated as non-pointed by these rules. This is why the result is a rough reference, even when your four distances are consistent.

The rules remain a draft awaiting calibration with labelled photographs. The interface does not turn their internal match weights into an accuracy percentage. It also does not calculate facial symmetry or a harmony score from information the manual form does not have.

Compare hand measurements with a photo result

A manual face shape calculator and a photo detector may disagree because they begin with different observations. The hand method uses your chosen hairline and straight widths. A photograph uses particular landmark points, and its apparent widths depend on pose and lens perspective.

The existing scanner applies a draft correction to its landmark length-to-width ratio. Your full hairline-to-chin measurement already uses the intended manual convention, so this route does not apply that correction again. That is a difference in measuring methods, not evidence that either result is the final truth about your outline.

If you compare both routes, look at the two leading shapes and the measuring conditions. A small difference around a boundary is a reason to recheck the setup. You can use the haircut guide or men's face-shape guide as a source of ideas while keeping your actual hair, frame fit and preferences in the decision.

Save or share your hand-measured reference

Download the result card when the values and choices are the ones you intended. The PNG carries the two shape outlines, the label “measured by hand” and the three ratios when they were calculated in this tab. It contains no photograph, harmony score or symmetry result.

The share link is even smaller: it contains only the two shape labels and whether the result was between them. It carries no raw dimensions or identifier, and the result data is in the URL fragment. A person opening it sees a shared hand-measured reference, not your filled-in form. Copying or sending the link is your choice.

A face shape quiz based on visual choices can be convenient, but this page uses measurements plus two observations. If the inputs do not make sense, clear the form and start again rather than choosing an answer that produces a label you wanted. The purpose is a useful reference for a styling conversation.

Updated 2026-10-11

The 7 face shapes

How each shape is measured, and what suits it.

Frequently asked questions