Build a lash map for almond eyes
A lash map for almond eyes translates a vague request such as “soft cat eye” into a sequence you can discuss. Instead of saving a picture with unknown lengths, you can show where you want the longest section and how quickly the outer edge should taper. The editor above makes that sequence visible and lets you change every zone.
Start by deciding which effect matters to you. Do you want to keep the natural outline, extend the outer third or add emphasis above the middle? These are different goals, even on eyes with the same shape label. The presets illustrate those differences; they do not certify that any length is suitable for your own natural lashes.
If you are unsure about the shape label, the almond eyes guide explains the opening and its tapered corners. The eye-shape tool offers an on-device check. Neither one measures extension load capacity.
Choose the effect in your lash map for almond eyes
The natural starting sketch rises gently toward the middle and drops at the final zone. It is useful for discussing a restrained change in outline. Its six reference lengths are 7, 8, 9, 10, 10 and 8 millimeters, read from the inner corner outward. Those numbers are editable examples, not a universal natural set.
The cat-eye sketch shifts the longest section to the outer third and shortens the final edge. Its starting sequence is 7, 8, 9, 10, 12 and 9 millimeters. Keeping a shorter last zone makes the placement goal explicit: outward emphasis with a taper, rather than making every outer lash the longest.
The open-eye sketch puts the longest section closer to the center. It starts at 7, 9, 11, 12, 10 and 8 millimeters. Compare the central rise with the cat-eye sequence to see how placement can change the intended outline without changing the eye itself.
Switching effects restores that effect's starting sketch. If you customize it and want to begin again, use “Reset this look.” You can download separate cards for two effects and compare them at your consultation.
Adjust the lengths one zone at a time
The length selectors run from the inner corner to the outer corner. Change one zone and watch the diagram update. The strokes are a schematic representation of the sequence; they are not an accurate photograph of extension thickness or how a curl will lift off a lid.
Use small changes when explaining your preference. Moving the longest length inward by one zone expresses a different goal from increasing every zone. Lowering the final number expresses a taper. Your technician can translate those intentions into a practical set even if the final measurements differ from the card.
The editor accepts whole-millimeter reference values from 6 through 15. That range keeps the sketch manageable; it is not a safety range or an endorsement of every number in it. A technician may choose shorter lengths, a different curl or another arrangement after examining your lashes.
Read the map correctly on both eyes
The diagram shows one reference eye with clear inner and outer labels. Apply the meaning of that sequence separately to each eye. The first zone is always nearest the nose and the last zone is always toward the temple.
Do not read one eye from left to right and then blindly read the other in the same screen direction. Mirror the placement across your face while retaining the inner-to-outer order. Two eyes can also have differences in corner direction, lash growth or lid behavior, so your technician may make two related maps rather than copying one exactly.
The six numbered zones are not an extension count. They divide the plan into areas. Actual placement depends on the lash line and the chosen application method; a six-zone drawing does not instruct someone to attach six clusters.
Discuss curl separately from length
Curl and length describe different properties. The millimeter sequence tells the technician where you want emphasis. The C, CC or D field records a curl label to discuss. It deliberately does not pretend to simulate how that curl will look on your photograph.
Product naming and curl profiles can vary, and the final choice also depends on natural lash direction and the desired clearance around the lid. Ask your technician to show the relevant options from the products they actually use. You can update the card after that discussion so it remains a useful record.
The eyeliner guide for almond eyes covers a separate decision: the line you draw along the lid. An eyeliner wing and an extension map may emphasize a similar area, but their measurements and application are different.
What the shape label cannot decide
An almond opening describes a visible outline. It does not reveal how strong each natural lash is, how much an extension will weigh or whether a product is suitable for you. The same outline can occur with different lash density, lid creases and growth directions.
For corners that point down or up, the downturned-eye guide and upturned-eye guide can help you name what you notice. Use that description to start a conversation about placement. Do not treat it as an automatic instruction to increase or decrease a particular length.
The editor uses your manual choices and stores no photograph. It does not perform a lash assessment, diagnose eye conditions or determine adhesive compatibility.
Save a clear consultation card
Download the PNG after choosing the effect, editing the lengths and selecting the curl label. The card includes the sequence and reading direction so you can take it to your appointment without having to reopen the tool.
Tell the technician what you like about it: a quieter outer corner, a more central peak or a gradual transition. Ask them to confirm actual lengths, curl and load based on your natural lashes. It is reasonable for the finished plan to differ from your starting sketch.
Keep the accepted plan as a reference for a later appointment. If your preferences change, make a new card instead of assuming that an old sequence remains suitable indefinitely.
Updated 2026-10-08